Industrial equipment rarely fails without warning. Bearings develop wear, structural components accumulate fatigue damage, temperatures rise, and vibration patterns change as machinery deteriorates. The challenge for manufacturers and equipment operators is to recognise these changes early enough to prevent unexpected failures without replacing components unnecessarily. Predictive maintenance addresses this challenge by using operational data, engineering models and analytical techniques to estimate equipment condition and identify developing problems.
Increasingly, simulation and digital twins are strengthening this approach. By combining real-world measurements with virtual representations of physical equipment, engineers can move beyond identifying abnormal behaviour towards understanding why it occurs, how damage may progress and when maintenance may become necessary.
For industries such as automotive manufacturing, aerospace, railway engineering, marine operations and heavy machinery, this offers an opportunity to improve equipment reliability while reducing unplanned downtime and maintenance expenditure.
From Preventive to Predictive Maintenance
Traditional maintenance strategies generally fall into two categories.
- Reactive maintenance involves repairing equipment after a failure occurs. Although straightforward, it can result in unexpected production interruptions, secondary damage and expensive emergency repairs.
- Preventive maintenance follows predetermined schedules. Bearings may be replaced after a specified number of operating hours, for example, regardless of their actual condition.
- Predictive maintenance takes a different approach. It uses information about the equipment’s present condition and operating history to determine when intervention may be required. Measurements such as vibration, temperature, pressure, strain, rotational speed and electrical current can provide evidence of developing problems. However, interpreting these measurements is not always straightforward. A rise in vibration might indicate bearing deterioration, shaft misalignment or simply a change in operating load. Understanding the difference requires knowledge of how the equipment should behave under those conditions.
This is where engineering simulation becomes particularly valuable.
How Simulation Supports Predictive Maintenance
Computer-Aided Engineering (CAE) allows engineers to investigate the physical behaviour of equipment using mathematical models. Finite Element Analysis (FEA) can predict structural stresses and deformation. Modal and dynamic analysis can identify natural frequencies and vibration characteristics. Thermal simulation can examine temperature distribution, while fatigue analysis can estimate damage caused by repeated loading.
These capabilities are traditionally associated with product development and design validation. However, they can also provide valuable information throughout a product’s operational life.
Consider an industrial rotating shaft. Structural and dynamic simulation can establish its expected response under different speeds and loading conditions. If actual measurements begin departing significantly from this predicted behaviour, engineers can investigate whether the difference indicates deterioration.
Simulation therefore provides a physics-based reference against which operational measurements can be interpreted. Rather than relying exclusively on statistical trends, maintenance decisions can incorporate an understanding of the underlying mechanical and thermal behaviour.
Understanding Digital Twins
A digital twin is a virtual representation of a physical asset that is maintained using information from the real system. Unlike a conventional simulation model created for a particular engineering study, a digital twin is intended to remain connected to the physical asset throughout some portion of its operational life. The connection may involve sensors, operating records, inspection results and other relevant information. These inputs help update the virtual representation so that it reflects the condition or behaviour of the actual equipment.
In short, digital twins combine real-time equipment data with simulations to test fault scenarios, spot emerging problems, and estimate remaining useful life. This helps teams plan timely maintenance, reduce downtime, and avoid unnecessary repairs.
Predicting Fatigue and Remaining Useful Life
Fatigue is particularly important in equipment subjected to repeated loading. Even when individual loads remain below the material’s static strength, repeated stress cycles can gradually initiate and propagate cracks. This makes fatigue a significant concern for rotating machinery, vehicle structures and many industrial components. Simulation can estimate stress distributions and identify regions where fatigue damage is most likely to accumulate. Operational data can then provide information about the actual loading experienced by the component.
Let us see some industrial examples where predictive maintenance and digital twins make an impact.
Automotive Manufacturing: Monitoring Production Equipment
Automotive factories contain numerous robots, presses, conveyors, machine tools and other systems whose reliability directly affects production.
Consider a robotic welding installation operating continuously across several shifts. Repeated motion places mechanical loads on robot joints, bearings and drive systems. Changes in vibration, motor current or temperature may indicate developing wear. A simulation-based digital twin can represent the robot’s mechanical behaviour under different operating conditions. Sensor measurements can then be compared against expected responses to identify deviations that warrant investigation.
Maintenance teams may consequently detect developing problems before they cause unexpected stoppages. The same principle can apply to stamping presses, industrial drives and other high-utilisation manufacturing equipment.
Aerospace Engineering: Monitoring Critical Components
Aerospace applications place demanding requirements on structural reliability and maintenance planning. Aircraft components experience varying combinations of vibration, thermal loading, pressure and repeated mechanical stresses. Consider a structural component subjected to repeated flight cycles. Engineering simulation can identify regions experiencing significant stress concentrations and estimate how different operating conditions influence fatigue damage. Inspection records and measured operational loads can subsequently be incorporated into an updated assessment of the component’s condition. This information can help engineers identify areas requiring closer inspection and evaluate maintenance priorities. Such approaches must complement established airworthiness requirements, approved inspection procedures and certification processes rather than replace them.
Railway and Marine Applications
Railway engineering offers another important application. Wheelsets, bearings, traction equipment and bogie structures experience repeated mechanical loading and vibration. Sensors can monitor operating behaviour, while simulation helps distinguish normal load-dependent responses from potentially abnormal conditions. A digital twin of a bogie component, for example, could combine measured loading histories with structural and fatigue models to support condition assessment.
Marine engineering presents similar opportunities. Propulsion shafts, gearboxes, pumps and auxiliary machinery frequently operate under changing loads over extended periods. Simulation-informed monitoring can help operators understand vibration and thermal behaviour, assess deterioration and plan maintenance around operational schedules. For vessels operating far from maintenance facilities, avoiding an unexpected equipment failure can be especially valuable.
The Role of Advanced CAE Platforms
Developing a useful simulation-based maintenance system requires more than collecting sensor data.
Engineers need appropriate structural, thermal, dynamic and fatigue models, together with methods for evaluating different operating conditions. Model accuracy, computational efficiency and the ability to update assumptions as new information becomes available are important considerations.
Advanced CAE environments like those from Cadence can provide the underlying physics-based analyses required for these assessments.
Towards More Reliable Industrial Operations
Predictive maintenance represents an important evolution from repairing equipment after failure or servicing it according to fixed schedules.
Simulation contributes the physical understanding needed to interpret equipment behaviour, while digital twins connect that understanding with operational measurements. Together, they can help engineers recognise deterioration, estimate future performance and make better-informed maintenance decisions.
For automotive, aerospace, railway and marine and other industrial applications, the potential benefits include improved equipment availability, more effective maintenance planning, reduced unnecessary component replacement and greater operational reliability.
As engineering simulation, sensor technology and data analytics become more closely integrated, predictive maintenance can increasingly transform maintenance from a reactive activity into a planned, evidence-based engineering process.