The Stratasys F120 3D Printer is part of the Stratasys F123 series of printers. Based on FDM technology, this is a plug and play industrial grade printer that streamlines functionality while eliminating complexity from typical workflow processes. It is suitable for everything from rapid prototyping and tolling to full manufacturing.
The F120 printer makes it simple even for the novice to get started with 3D printing in the design studio, office or education environments. It is geared to create high-quality FDM models without much technical knowledge. Streamlined plug-and-print functionality removes complexity from typical workflow processes. Printing is easy with a user-friendly touch-screen and an intuitive interface. The printing area will have a 10”x10”x10” build volume. It will support ABS as well ASA material capabilities. It will provide SR-30 soluble support material and 3 layer thicknesses. One salient new feature of the Stratasys F120 printer is the large filament boxes that enable users to print without replenishing for about 250 hours continuously. Aimed at bridging the gap between home use and industrial use, the F120 3D Printer delivers reliable, accurate, functional as well as complex parts faster than competitive 3D printing solutions. The printer allows designers, engineers and everyone else to experiment with innovative ideas, while providing easy to own, industrial grade additive manufacturing technology.
Stratasys has a presence in India, and DesignTech Systems is their partner for the F123 printing solutions, including the robust F120.
System Size and Weight: 889 x 870 x 721 mm (35 x 35 x 29 in.), 124kg (275 lbs)
Noise Specification: 46 dB maximum during build, 35 dB when idle
0.330 mm (0.013 in.) ABS, ASA, PC-ABS
0.254 mm (0.010 in.) FDM TPU 92A, PLA, ABS, ASA, PC-ABS
0.178 mm (0.007 in.) ABS, ASA, PC-ABS
0.127 mm (0.005 in.) ABS, ASA, PC-ABS (Only on F170, F270, F370)
Accuracy: Parts are produced with an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater.
Wired: TCP/IP protocols at 100 MBPS minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802, 11n, g, or b;Authentication: WPA2-PSK, 802.1x EAP, Encryption: CCMP, TKIP
System Requirements Windows 7, 8, 8.1 and 10 (64 bit only) with a minimum of 4 GB RAM (8 GB or more recommended)
Operating: Temperature: 59 - 86 oF (15 - 30 oC), Humidity: 30 - 70% RH
Storage: Temperature: 32 - 95 oF (0 - 35 oC), Humidity: 20 - 90% RH
Power Requirements: 100-132V / 15A or 200 - 240V / 7A, 50/60 Hz
Regulatory Compliance: CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach
Available material: ABS-M30, ASA, SR-30 Support material
Build tray dimension: 254 x 254 x 254 mm (10 x 10 x 10 in)
Material Bays: 2 total (external) 1 model / 1 support
Software: GrabCAD Print